Adding a Sun Room to Our Home Improved Our Lives

4 Ways To Take Effective Care Of Your Water Pump

by Sara Cook

If you rely on a water pump to bring water to your home, you are going to want to make sure that you know how to take proper care of your water pump. As with most household appliances and machinery, the right care and attention will extend the usable life of your water pump.

#1 Get Your Water Pumped Professional Serviced

First off, you should get your water pump professionally serviced every few years. This is not something that you have to do on a yearly basis, however it is a good idea to get your water pump professional serviced on a bi-yearly basis.

Getting your water pump professionally serviced is a great preventative measure to take. A professional will look over your water pump, tighten up any loose bolts or mechanisms, and identify any necessary service or repairs that your tank needs to continue to operate effectively. These water pump repairs are usually done at the same time to ensure that your water pump continues to operate as effectively as possible.

#2 Clean the Cooling Fans

In between professional services, it is up to you to take care of your water pump. Your water pump is driven by a motor. When the motor is in operation, it can produce a fair amount of heat. Your motor is cooled off via the cooling fan. Over time, dust and dirt can get sucked up into your cooling fan.

You can clean up your cooling fan by turning off the pump and using either a vacuum or a soft bristle brush to clean away the debris that can accumulate on your cooling fan. This is a task that you should do every few months. Keeping the cooling fans clear will allow them to run more effectively and keep your water pump engine as cool as possible.

#3 Fight Against Corrosion

Although water is supposed to stay inside of your water pump, it is not uncommon for your water pump to be exposed to moisture. Moisture can lead to corrosion, which is why you should make sure that you protect your water pump against corrosion.

You can protect your water pump from corrosion by spraying it with an anti-corrosion spray. These sprays are inexpensive and can be found at most paint or home improvement stores. They work best when applied before any corrosion is present.

#4 Watch Out for Leaks

You should check on your water pump every few months. When you do, watch out and make sure that there are not any leaks or drips. Feel on the ground around your water pump and make sure that there are not any wet spots. If you see a wet spot, take the time to figure out where it is coming from. Identify the source of the leak and patch it up.

Share